Table of Contents
Advertisement
The Quasar Surface is now
recognized by the network and
linked to the Quasar Engine.
You're ready for the next step!
Now you can proceed with
configuring your Console.
Quasar Engine –
Audio outputs
configuration
1. Using a PC connected to your
studio network, go to the
Engine Web UI home page
2. In the left column, select
Program and Monitor outputs.
3. Enter the planned channel
numbers for Quasar Engine
(Livewire Sources) outputs.
4. Enable the streams you need
to be active on the Engine
5. Click the "Apply" button.
Tip: We recommend choosing a
Channel ID which has the first 2 or
3 digits corresponding to the last
© 2016 Axia Audio - Rev 2.0
Advertisement
Table of Contents
