Create The Operator's Mic Source Profile - Axia Quasar User Manual

Create the Operator's Mic Source Profile

The Operator's mic is intended for the operator of the Quasar console, so let's create this first.
Click Create new source profile. You'll see, in part, the following :
Now enter the following settings:
Select "Operator Microphone" from the Source type drop-down list. In the Source name field,
type a useful name, like "Host" or "Board Op", that the DJ can easily identify. This is the name that
will be shown on the display of fader strip the source is loaded to.
In the Primary source field, enter the board mic's Channel Number. (Each audio source in the
network has its own unique Channel ID number.) If you know the number, just type it in; if not, use
the Browse button to the right of the field to select the source from your network.
With just these three basic options, you have enough for a working Source Profile! You could
easily leave the remainder of the options at their default values, but a couple of additional
adjustments will help eliminate Control Room errors.
In case you want to be able to control the Microphone Gain and Phantom Power directly from the
console (these are settings normally belonging to the xNodes' Web UI) you can do so by entering
the number of the Physical Input your microphone is connected to.
Click Apply. The page will refresh and display a new field called Source picture. This will let you
upload a picture that will be associated to the source, and show up on the console channel strip
displays when the source is loaded. The picture must be .PNG or .JPG type, max.192x192pixels,
and max. 8kB file size. If, after choosing the file and pressing the Upload button, a preview of the
picture does not appear in the UI, then your picture is not the correct format.
NOTE: On all UI pages, the "Apply" button will apply the settings you just
entered and leave you in the current page, while the "OK" button will apply
the settings and return you to the upper level of the UI.