The Xr-4Fad Fader Module - Axia Quasar User Manual

needed for recording workflows. Currently the TALK button will trigger the Talk to Studio
function.
5. Layer / User buttons. Quasar offers 4 surface layers. These buttons enable the operator to
quickly select the layers. Layers can be configured by accessing the Web UI built in each fader
module. If layers are not needed, the system could be configured so that each layer is a
duplicate of the previous and these buttons can be used as four Bank (A-B-C-D)
buttons for the eight user programmable buttons located above. With the use of
Pathfinder, the buttons can achieve any custom needs of the facility.
Alternatively, the Layer buttons can be completely disabled in the MTS Module Web
UI, (by browsing the Web UI Customize page).
6. Touch sense User buttons. Eight user buttons with capacitive touch sense are
available for custom functionality. With the use of Pathfinder, these buttons can be
made to initiate changes with the surface or some other property within the facility.
The touch sense function will drive a "pop-up" on the display which acts as a
dynamic labeling option for the buttons. This will the button label when the finger
touches the button, before it is pressed. Pathfinder can change the text in the pop-
up and change the color of the button (RGB color illumination).
7. Profile button. A fixed button which shows the defined show profiles onto the
display for user selection. Currently, a press-and-HOLD of the button will load the
last loaded profile (back to its default settings).
8. Display. This is a 12.1" Industrial-grade display with a robust protective glass. The
graphics on this display change according to the operations being triggered. The
next section will cover this item in more detail.
9. Five touch sense rotary encoders. The five rotary encoders are soft driven,
meaning their functionality changes based on actions by the operator. The display
will indicate the function of the encoder. In some cases, the touch sense function
will trigger a "pop-up', providing a control and feedback when the display is not
viewing the current functionality of the rotary encoder.

The XR-4FAD Fader Module

The XR 4-Fader module is a full control module that is connected through a network
connection.
The XR 4-Fader module is composed of the following items:
1
2