Table of Contents
Advertisement
Input:
The Input selector is used to select any source native to the Engine or select an "EXTERNAL" source
from the network.
Source name is a text field used to document the input.
Address is used to define the Livewire channel number of an "EXTERNAL" source or the address of an
AES67 stream.
Stream type is used to define the source. With AES67, the stream could be a linear 24 bit up to 8
channels or linear 16 bit. The Livewire type sources are identified. Make sure you select the correct type.
Mode:
Manipulation within the matrix is referred to as routing and will be configured by a mode selection. Two
stream classes are utilized within the different mode designations:
•
Class "stereo": streams with 1 or 2 channels ("Left" or "Right" may also be used in this class)
•
Class "multi-channel": streams with 3 to 8 channels
Mode option "Pass multi-channel" passes all 8 matrix inputs to the corresponding outputs transparently.
•
Unity gain in all channels
•
No up-/down-mixing
•
Preserving the channel order regardless of the actual number of channels in the input and output
streams
•
No signal in output channels, where corresponding channels do not exist at input
Mode option "Pass stereo" passes only the stereo part of the matrix transparently, and blocks the
multichannel part.
Advertisement
Table of Contents
