Create A Guest Mic Source Profile - Axia Quasar User Manual

In the Source Availability box, you have the option to control what faders and Monitor channels
the source may be assigned to. Uncheck the External — it's not very likely you'd assign the
Operator's mic directly to the monitors!
Press the OK button at the bottom of the page and your new Mic source is ready to use – you've
just created the Operator Mic Source Profile.
NOTE: There should only be a single Operator source type loaded to the
console's faders at any one time. This is because the Operator source type
contains some preset logic functions specific to the type, such as muting of
the Control Room (CR) monitors when the mic is open, as well as being the
default source for any Talkback commands that are engaged. Therefore, any
additional Microphone source should be one of the other microphone source
types.

Create a Guest Mic Source Profile