The Mts-Mon Master Module - Axia Quasar User Manual

customize the workflow is important. Additionally different people have different workflows and
we've made it possible to access some functions in multiple ways. This way, the board operator
can work the way they want — not the way somebody else thinks they should work!
This chapter will start with an overview of Quasar's control modules to help familiarize you.
Then, we'll have a look at some of the more specialized options.

The MTS-MON Master Module

Also referred to as "MTS Module" (or "Master
Module") is the center point for all control in the
Quasar system. A combination of fixed
buttons, soft hardware (hardware that changes
function based on the user operation), and
touch display controls.
1. CR Headphones section. There are 6
buttons and a touch sense rotary encoder
that are fixed to the operator's headphone
control. The 6 buttons are used to select the
more common mixes that need to be
monitored. The rotary encoder, when
touched will highlight Headphone
information on the display (8) and a rotation
of the encoder will adjust the level to the
operator's headphones.
2. CR Speakers section. The same as above
(CR HP) where six buttons and a touch
sense rotary encoder are fixed to control the
main monitor speakers in the control room.
Between both sections is a LINK button
which causes the two sections to copy each
other. Selecting a mix in the Speaker
section will also select that same mix in the
Headphone section.
3. MON OPT and LINK. The MON OPT
button enables the operator to have more
control options over the monitoring.
Pressing this button changes the display (8)
and provides additional sources to be
monitored, control to dim values, dedicated
talkback functions and activation of CR Headphone 4-Band EQ. The LINK button links the
input selection of the two CR monitor sections, by making the HP follow the SPK selection.
4. Fixed Function buttons. Quick access buttons for operators to navigate their workflow. The
HOME/CH.SEL returns the display to the HOME screen (Starting point of navigation) when
pressed momentarily. A press-and-HOLD of this button will change the display so that any
channel can be selected for modification. Channel modification options are covered later.
RECORD button will enter into (or exit) the record mode. Record mode offers customization
8
9
1
3
7
6
5
4
2