Table of Contents
Advertisement
•
In the example shown above, we're mapping a hybrid from a VX Broadcast VoIP system,
using the sections highlighted in orange:
o Type in the IP address of the VX Server into the Server IP box.
o Select the VX radio button.
o Enter the Studio name configured in your VX system into the Studio Name box.
o Enter the number of the VX hybrid from the specified VX Studio into the Fixed
Hybrid box.
o Note: If the Server IP has authentication requirements, the authentication syntax in
the Server IP field is username:password@IP ADDRESS . For example,
user:test@192.168.100.200 attempts to log into the specified IP address with
username user and password test.
•
US Phone ties the Source Profile to the Call Controller soft interface in the master module.
Enter the Hybrid number to tell the fader which hybrid the Source Profile controls.
•
To access the Call Controller, move to the console and select the CALL CONTROL tab in
the Master module's touchscreen. The screen will change to provide an 8 line controller.
The final step is to define how you want to handle mix-minus. Quasar (and all Axia consoles)
automatically generates mix-minus (N-1, "clean feed") for each phone caller taken to air. To
Advertisement
Table of Contents
