Table of Contents
Advertisement
and then load your Show Profile and newly created Phone sources to your console.
VX System integration (single line)
Single line is the method most used in European countries, wherein a single line is assigned to a
single hybrid. This is also known as "hybrid per fader" mode; that is, there is no switching between
multiple lines on a single hybrid. Each line is presented on its own dedicated console fader. If four
phone lines are desired for use, each line's hybrid is presented on a separate fader. No line
controller interface is used.
Setting Up for Single Line Operation
1. Create a Source Profile for your fixed hybrid
2. Select Phone in the Source type field.
3. Select the appropriate Primary Source using the adjacent dropdown Source Selector box
to pick the desired Livewire channel from your VX phone system.
4. In the Phone Control portion of the Source Profile, there will be an EU Phone section as
shown in the image below.
» Enter the IP Address of the Telos phone system in the Server IP box.
» Select the Telos phone system you're interfacing with. Choose the VX radio button
and enter the appropriate settings for the device.
ý enter the Studio Name as configured in your VX Engine, and the number of
the Fixed Hybrid.
Other phone integration (GPIO)
GPIO is a way of controlling third-party hybrids which do not work with Telos control protocols;
instead, basic GPIO closures are used to "take" and "drop" lines.
Advertisement
Table of Contents
