Axia Quasar User Manual page 56

Hide thumbs Also See for Quasar:
Table of Contents

Advertisement

Group Start
Fusion contains a Group Start feature that enables the user to turn several faders ON by
pressing the ON key of the Master fader; useful in roundtable discussions or multi-talent
bullpens.
This function can be controlled in this screen, or by setting the option in each individual
Channel Options screen.
Master: Designates this fader channel as a Group Start Master. Pressing its ON or
OFF keys will turn Slave faders on and off as well.
Slave: Designates this fader channel as a Slave. It will mirror the ON/OFF state of the Group
Start Master fader.
Independent: Normal ON/OFF operation.
Fader Position
Select the Use: radio button to specify the level at which the fader should be set when
the Show Profile is loaded. You may specify any level between -73 dB and +10 dB.
This setting operates in conjunction with the Channel On/Off Status described above.
Using these two settings, you can set a channel to turn ON, and its fader to assume a
preset output value, when the Show Profile is loaded. This is useful when creating a
Show Profile for use with automation systems; combine it with the Control Lock Map
controls to set up a Show Profile for unattended, automated operation with controls
that cannot be inadvertently changed by careless operators.
Individual Headphones
Section
Any Quasar input defined as a Microphone source can have a dedicated headphone feed, to
facilitate individual Talkback (IFB) to and from the board operator or other talent. The options
below affect this dedicated headphone feed, if enabled.
Current Source
If a Microphone source is loaded to this channel, choose the audio source to be fed to
its Individual Head- phone Feed (Backfeed), if desired. Choices include all Program
and Aux Send buses, Monitor bus, or a direct feed from any individual source.
Source For Preset 1 / Preset 2
Select the audio source assigned to the Preset keys on Axia Talent Headphone
accessory panels. Choices include all Program and Aux Send buses, Monitor bus, or
a direct feed from any individual source.

Advertisement

Table of Contents
loading

Table of Contents