Record Mode Screen Options - Axia Quasar User Manual

Show Profile load. You may specify a value between -85 dB and 0 dB.
Studio Monitor Dim Gain
Select the Use: radio button to specify the amount of attenuation, up to -30 dB, to be
•
applied to the Studio Monitor channel when Talkback or Preview are in use.
Studio Monitor Muted State Gain
Select the Use: radio button to specify the amount of attenuation, up to -85 dB, to be
•
applied to the Studio Monitor channel when muted.
NOTE: Normally, turning a Studio microphone channel ON mutes the Studio Monitor
speakers entirely. This setting allows you to let the monitors to be heard in the Studio at a
reduced level, even while Studio Mics are active.
GPIO Channel For Studio Monitor
•
Enter the GPIO channel number used to trigger On Air lamps or other GPIO functions.
This option should typically be programmed with the same logic channel number for
all Show Profiles.
Master Module Control Lock
Map Section
This functions like a "master lock" for console functions – a superset of the Control
•
Lock Map found in the Show Profiles Channel Options pages. You can essentially
prevent any setting on the board from being changed if you so desire.
Place a check mark in any of these boxes to keep the board op from changing the Show
Profile's pre-select- ed options.
When done editing the Monitor Section options, be sure to click the Save Changes button.
You'll be returned to the Show Profile options screen.

Record Mode Screen Options

Record Mode is like a "macro" that helps talent quickly prepare to record phone bits,
interviews or other program segments for later airing. Any source assigned to the Program-4
bus automatically feeds the Record and Phone buses as well.
Sources assigned to Program-4/Record will follow the Record options in their Source Profiles;
the options here primarily affect the behavior of Monitors when Record Mode is invoked.
Record Mode Configuration Section
Record Mode Activation
Disabled: Disables Record Mode entirely for this Show Profile.
•
Enabled: Allows activation of basic Record Mode for this Show Profile. CR Monitor and
•