Setting Up For Us Phone Operation; Show Profile Settings For Us Phone Operation - Axia Quasar User Manual

Hide thumbs Also See for Quasar:

Table of Contents

Setting Up for US Phone Operation

Using the US Phone method of operation requires the use of the Quasar Call Controller

module. With this method, you can use Quasar's Show Profiles feature to instantly recall show

setups that choose between different phone systems, or even different phone system

configurations.

For example, one Show Profile could call up the configuration needed for a Talk format,

while another might recall the configuration needed for music request lines, allowing a single

studio to be the Control Room for any station in a cluster.

Using this mode requires two steps: defining a Show Profile, then defining Source Profiles.

First, create a new Show Profile using the instructions found in the "Show Profiles" section of

Chapter 2 of this manual.

Then, configure your new show profile. The Show Profile page of your Quasar's Web

interface displays the name of the show, all the Channels (faders) of the surface, followed by

several additional items, one of which is the Phone link. If more than one Call Controller module

is installed in your console, multiple instances of this configuration option will be shown.

Select the Phone link to display the following screen:

Table of Contents