Table of Contents
Advertisement
The table shown in the picture above shows which of the 64 input channels available in the Quasar
Engine, will be loaded on the four channel strips each time the LAYER 1, 2, 3, 4 buttons will be
pushed on the Master Module.
All fader modules default to the channel assignement displayed above. In order to quickly increment
or decrement channels, in banks of four, just click on the "+4" or "-4" buttons
In case you don't need to use Layers, just make sure that they are disabled.
You can disable Layers by navigating the Master Module Web UI and selecting the Customize menu.
This will switch off the Layer buttons on the Master module.
© 2016 Axia Audio - Rev 2.0
Advertisement
Table of Contents
