Signal Mode Locked
Unlocked: allows board op to change the Signal Mode from the surface.
•
Locked: prevents board op from making changes.
•
Fader Trim Gain
Select the Use: radio button to specify a fader trim cut or boost between -25 and +25 dB.
•
Fader Trim Lock
Unlocked: allows board op to trim the fader using Channel controls on the console.
•
Locked: prevents board op from making changes.
•
Panorama Position
Select the Use: radio button to Pan the input signal left or right of center.
•
Phase
Normal: No phase change to input signal.
•
Invert Left: Reverses the phase of the left input channel only.
•
Invert Right: Reverses the phase of the right input channel only.
•
Invert Left and Right: Reverses the phase of both input channels.
•
EQ Active
Bypass: Loads the input source with no EQ adjustment.
•
Active: Loads the source with EQ active, and applies EQ settings specified in following
•
sections.
EQ High Mode
Shelf: Selects high-shelf style of EQ application.
•
Peak: EQ is applied to a selected frequency, "notch filter" style.
•
EQ High/Mid/Low Frequency
Select the Use: radio button to set the center frequency of the selected band.
•
EQ High/Mid/Low Gain
Select the Use: radio button to specify an EQ cut or boost between -25 and +15 dB to the
•
selected frequency.
Assign To...