Vmix Main Controls; Vmix Submixer Controls - Axia Quasar User Manual

VMix Main Controls

The VMix Main output provides a summed mix of all 16 submixes. Unless you need a single output
that combines the audio from of all the submixes, you may leave this disabled — it doesn't need to be
enabled for the submixers to work. There are only a few settings for this control:
• Out Name. You can enter a friendly name for the VMix Main output, which will be displayed as a
source name on your Axia network.
• Out Stream Type. Choose from Live Stereo, Standard Stereo, or leave it Disabled if no Main
stream is desired.
• The Status window will normally display "OK" when the stream is enabled.
The Audio box will be green when audio is present.
•

VMix Submixer Controls

In most cases, the VMix Subs are the only channels you will need to enable, since each Sub has its
own direct output. Only enable Submixes you intend to actively use; active submixes without any
activity clutter up your network with empty streams.
First, you'll want to enable the Submixer you're working with. At the top of the section, you'll see (in this
case)
Submix 1 displayed on the screen. Next to that are controls for:
• Gain. Set this at whatever output level you want the submix output stream volume to be.
• Channel. All Livewire audio streams are assigned a Channel number; put a unique value in this
box.
• Out Stream Type. Choose from Live Stereo, or Standard Stereo. Disabled turns off the
Each VMix Sub submixer input includes an on/off setting, a gain setting, and
submixer.
automatic fade-up/fade-down time parameters. Using one is easy; let's walk through the