Table of Contents
Advertisement
•
With VX systems, use this field to define the "Studio" name. This information allows the surface to
interface with the appropriate configuration as defined in the VX.
The Show Password field is used to permit access to the Call system that has password
protection at show levels. If you have a password for the phone system Show you want to use,
enter it here.
The Hybrid Mode option swaps the banks of the Call Controller. Normally, the left column
controls Hybrid 1, and the right column controls Hybrid 2; selecting the reverse option will
reverses the order.
The Line Mode option defines the operation of the two Call Controller columns for line selection.
The default is 8 lines, which provides control for Hybrid 1 and Hybrid 2. The 16 lines option is
available for high call requirements and, and when setting each button as a different line.
Once you've entered the information required for your phone system, save your changes and
proceed to Source Profile configuration.
Source Profile Settings for Multi Line Operation
1. Create a source profile
2. Select Phone in the Source type field.
3. Select the appropriate Primary Source using the adjacent dropdown Source Selector box
to pick the desired Livewire channel from your VX phone system.
4. In the Phone Control portion of the Source Profile, you'll skip the EU Phone section and
move to the US Phone section.
» Select the Call Controller 1 radio button
» In the Hybrid box, enter the hybrid number you want this Source Profile to be
associated with. This will be a 1 or 2.
» The Fixed Line box is another method to do what the EU Phone method accomplishes;
eg. assigning a dedicated line to a dedicated fader. Most will not use this option so this
can be left as 0.
» The Mashing Allowed checkbox permits a single hybrid to handle multiple callers at
once by allowing the board operator to select multiple line buttons. Check (or un-check)
this box as you desire.
5. Typically these steps are done twice for the two hybrid interfaces
6. You should consider editing the show profile and define which channel these two source
profiles appear.
Advertisement
Table of Contents
