The Mic In / Tb Out Module - Axia Quasar User Manual

This module provides all the standard controls needed for studio
operation along with user definable buttons per fader.
Each hw button is RGB (Red, Green Blue) , and is programmable by
the user via the Module's Web UI.
Both the top encoders and the motorized fader knobs are touch
sensitive, and can interact with the operator.
Each fader-channel has LED meters for source level indication or
Automix gain adjust information. Above each meter are LED status
indicators for the channel.
Each fader channel also includes a color display for channel/source
information. Between the two large buttons at the bottom of the
module is an RGB color bar which can be used for fader
identification.
The Master module with the fader modules provide the functionality
expected in a studio. With this comes some standard functions that
automatically happen based on what is known (or assumed) by the
console, such as:
§ Muting
§ ON/OFF commands
GPIO control
§
§ Mix conditions
§ Source ownership (which console has control of an active source)
§ Phone control
...and many others.
Internally, the XR Fader module has dual Gigabit Ethernet , USB connectivity, and dual 12VDC
PSU inputs. These provide connectivity to the rear I/O module, and the MTS module. Depending
on the type of fader module, a USB or Ethernet control loop will be used.

The MIC in / TB out Module

The MIC in / TB out module is an optional accessory
designed to provide connectivity for one Microphone
(input) and one Headphone (output) right at the
surface, so that a gooseneck microphone can be used