Table of Contents
Advertisement
•
Studio Monitor. This is the source typically sent to Guest Studio monitors & headphones
by the Control Room board op. It is assigned using the "Studio Monitor" controls on the
Quasar Monitor Module.
•
External. Sends the audio from the channel you specified in the External Feed Src. Box
at the top of the Custom Backfeed Options box.
Note: Record Mode is a special "macro" mode that helps talent record audio
for later use with a single press of the Quasar's console's "Record" key,
located on the Monitor Module. We'll cover use of this function in later
chapters.
So, say you want to construct a Custom conditional backfeed for your Codec that sends the CR
Headphone when the channel is OFF, the contents of the Record bus when the channel is OFF
but assigned to Preview, and a PGM-1 mix-minus when the channel is ON, you'd set it up like so:
Naturally, this level of complexity is not necessary in every radio station, but we made it available
for specialized situations where highly-tailored Backfeeds are required.
Advertisement
Table of Contents
