4th Meter Source
Retain: Does not change the #4 Meter on the Quasar display; keeps the Meter
•
selection the board operator was using prior to entering Record Mode.
Program 4, Record, Phone, Auxiliary A – D, External 1 – 3, Monitor: Changes
•
the #4 Meter to the selected bus, external source, or the audio of the CR Monitor
when Record Mode is engaged.
Recall: Re-loads the #4 Meter selection that was manually selected by the board
•
operator the last time
Record Mode was active.
When done editing the Record Mode options, be sure to click the Save Changes button.
You'll be returned to the Show Profile options screen.
Group Start Screen Options
Group Start
Quasar contains a Group Start feature that enables the user to turn several faders ON by
pressing the ON key of the Master fader; useful in roundtable discussions or multi-talent
bullpens.
This function can be controlled in this screen, or by setting the option in each individual
Channel Options screen.
Master: Designates this fader channel as a Group Start Master. Pressing its ON or
•
OFF keys will turn Slave faders on and off as well.
Slave: Designates this fader channel as a Slave. It will mirror the ON/OFF state of the
•
Group Start Master fader.
Independent: Normal ON/OFF operation.
•
When done editing the Group Start options, be sure to click the Save Changes button. You'll
be returned to the Show Profile options screen.
Phone Screen Options
The Phone screen is used when setting up a Telos talkshow system for use with your console.
Please refer to Chapter 5, "Working With Phone Hybrids", for details. If no Call Controller module
is installed, this screen will be empty.