Notices And Cautions; Caution: Double Pole/Neutral Fusing; Warning - Axia Quasar User Manual

Hide thumbs Also See for Quasar:

Table of Contents

Notices and Cautions

CAUTION:

The installation and service instructions in this manual are for use by qualified personnel only. To avoid

electric shock, do not perform any servicing other than that contained in the operating instructions unless

you are qualified to do so. Refer all servicing to qualified personnel.

This instrument has an autoranging line voltage input. Ensure the power voltage is within the specified

range of 100-240v. The ~ symbol, if used, indicates an alternating current supply.

This symbol, wherever it appears, alerts you to the presence of uninsulated, dangerous

voltage inside the enclosure – voltage which may be sufficient to constitute a risk of

shock.

This symbol, wherever it appears, alerts you to important operating and maintenance

instructions. Read the manual.

The instrument power supply incorporates an internal fuse. Hazardous voltages may still be present

on some of the primary parts even when the fuse has blown. If fuse replacement is required, replace

fuse only with same type and value for continued protection against fire.

The product's power cord is the primary disconnect device. The socket outlet should be located near

the device and easily accessible. The unit should not be located such that access to the power cord is

impaired. If the unit is incorporated into an equipment rack, an easily accessible safety disconnect device

should be included in the rack design.

To reduce the risk of electrical shock, do not expose this product to rain or moisture. This unit is for indoor

use only.

This equipment requires the free flow of air for adequate cooling. Do not block the ventilation

openings in the top and sides of the unit. Failure to allow proper ventilation could damage the unit or

create a fire hazard. Do not place the units on a carpet, bedding, or other materials that could interfere

with any panel ventilation openings.

If the equipment is used in a manner not specified by the manufacturer, the protection provided by the

equipment may be impaired.

Table of Contents