Master Auxes (Orange Tab); Aux Returns (Orange Tab); Call Control (Orange Tab) - Axia Quasar User Manual

Hide thumbs Also See for Quasar:

Table of Contents

the priority of the channel within the automix.

At the bottom right, the GLOBAL PARAMETERS section allows to adjust the global parameters of

the entire Automixer, such as Attack and Release times and the Pre/Post fader position of the

automix.

For use in multiline workflows, such as is available with the Telos VX system, the Call Control

view will provide access to 8 phone lines and the ability to assign those to two different channels.

The view is organized with two columns for assignment to two different channels. In conjunction

with the SET/HOLD buttons on the channel, the operator can take callers and make calls through

this interface. For more on phone workflows, please refer to Appendix-YYY.

Master Auxes Tab

The system has 8 AUX

sends and each can have a

gain adjusted, enabled, and

can be monitored into the

PFL bus.

The view defaults to AUX1-4

controls. If you want to

control AUX 5-8 touch the

lower area of the screen to

highlight these controls with

the yellow box.

Pushing the encoder at the

bottom of the display will

immediately bring the gain

up to 0.0dB level for the

associated gauge

Aux Returns Tab

Table of Contents