Testing Inputs And Outputs - Axia IQ Quick Start Installation Manual

TESTING INPUTS AND OUTPUTS

1. On the console, press the top Options knob (M) of channel 1
(the first fader position).
2. Rotate the knob until the OLED for this channel displays "My
Mic", then press the Options knob (M) to select.
3. Locate the "Soft" key (N) under the OLED display for this
channel and press it twice.
4. Press the top Options knob (O) of channel 2 (the second fader
position).
5. Rotate the knob until the OLED for this channel displays
"Stereo-Src", then press the Options knob (O) to select.
6. Locate the "Soft" key (P) under the OLED display for this
channel and press it twice.
7. Press the top Options knob (Q) of channel 3 (the third fader
position).
8. Rotate the knob until the OLED for this channel displays
"1 kHz Tone", then press the Options knob (Q) to select.
9. Locate the "Soft" key (R) under the OLED display for this
channel and press it twice.
10. To the right of the faders, locate the Monitors knob (S). Above
the Monitors knob, press the PGM 1 button (T) so you are
monitoring Program 1.
11. On the fader strips for channels 1, 2 and 3, press the PGM 1
(U, V, W) button for each fader to assign the channel to those
mixes.
12. Press the "On" button (X) for channel 3 and adjust the
linear fader (Y) for the channel until you see the PROGRAM 1
meter on the OLED display (Z) reach -20. Adjust the Monitors
knob (S) as needed for proper monitoring of the volume in
the speakers.
13. Press the "Off" button (AA) for channel 3 to turn off the
channel.
14. Press the "On" button (BB) for channel 2 and adjust the
levels of the source. Make sure there is audio coming from
your stereo source.
15. You should now hear whatever tunes you are jamming to!
16. Press the "On" button for channel 1 (CC), the speakers should
now be muted. Pull on your headphones and adjust the levels
for your headphones to a comfortable level.
17. Press the "Off" button for channel 2 (DD) to turn off the
channel.
18. Adjust the level of channel 1 as you speak into the
microphone. Note: If you are not able to get adequate levels
from the mic, you may need to adjust the gain stages from
step 4 of "Basic Local Input Configuration".
YOUR SETUP IS COMPLETE!
That's it! You are now ready to experience Axia iQ, the high
performance audio console for today's broadcast studio.
© 2016 TLS Corp., All Rights Reserved.
M O
U V
N P
CC BB
T
S
Z
1490-00148-001 — QUICK START GUIDE: IQ CONSOLES
Q
W
Y
R
X
DD AA
C15/16017