Monitor Section Screen Options - Axia Quasar User Manual

Aux Send A-B-C-D On/Off Status
Off: Turns off selected Aux Send bus upon Show Profile load.
•
On: Turns on selected Aux Send bus upon Show Profile load.
•
Aux Return A-B Gain
Select the Use: radio button to specify the gain level at which the selected Aux Return bus will
•
be set. You may specify any level between -60 dB and +10 dB.
Aux Return A-B On/Off Status
Off: Turns off selected Aux Return bus upon Show Profile load.
•
On: Turns on selected Aux Return bus upon Show Profile load.
•
Aux Return A-B Signal Mode
Stereo: sets bus signal mode to Stereo.
•
Left / Right: takes the chosen side of the bus' stereo signal and sends it to both
•
sides of the stereo bus output channel.
Sum: Creates a sum of both stereo channels and sends the sum to both sides of the
•
stereo bus output chan- nel.
Aux Return A-B Panorama Position
Select the Use: radio button to Pan the output signal of the bus to left or right of center.
•
Aux Return A-B Assign To PGM1-2-3-4
On: Assigns the output of the specified Aux Return bus to the selected Program bus(es)
•
upon Show Profile load.
Off: Removes the output of the specified Aux Return bus to the selected Program
•
bus(es) upon Show Pro- file load.
Aux Return A-B Source ID
Dropdown box selects Aux Return's assigned source from saved Source Profiles.
•
Note that Program and other Aux buses are not available in this dropdown; choices
are limited to external devices only.
When done editing the Aux Send & Return options, be sure to click the Save Changes
button. You'll be returned to the Show Profile options screen.

Monitor Section Screen Options

Options in this section permit you to define Control Room and Studio Monitors & Headphone