Table of Contents
Advertisement
Chapter 5
Practical Help Guides
In many cases, our customers just want to know how to do one thing and why bother reading
through an entire manual to figure that out, this chapter is for you. This chapter is filled with single
help guides of common setups. If we forgot one, let us know!
Trigger an ON AIR Light
{page break here}
Setting up for GPIO control
The GPIO option is the default selection when you create a new Phone Source Profile. This type
is intended for single line hybrids like the Telos Hx1 and Hx2, but can also be used with older
single-line Telos phone systems as well as those made by other phone system vendors.
Please refer to the GPIO Telephone Hybrid Logic chart for the appropriate pinouts.
When configuring a Source Profile for this operational mode, the salient field is the Hybrid
answer mode dropdown box.
The default setting for Hybrid Answer mode is Normal, auto answer diasbled. If your desire is to
achieve pulses on pins 4 and 5 of the GPIO logic port associated with your phone hybrid, then you
must choose one of the two other options. These other options will create pulses when the
channel changes ON state or Preview state.
• Hybrid answer mode. Your choices are:
Advertisement
Table of Contents
