Source"Unload; Aes67 Support; Accessory Panel Support - Axia Quasar User Manual

Source"unload"

When loading shared resources, typically a facility codec, and said resource is in ownership by
another studio, the console will load the source into Listen Only mode. This permits the console to
have access of the audio from source, but is not able to control the source or provide backfeed audio.
The console will provide indication of who is the owner of the source so that the source so action can
take place if the newly requesting console can take ownership. In some cases, the last operator of that
other studio may have left, requiring someone to walk but customers have told us they don't want to
walk down to the other studio. The Request Unload option now appears on general
screen when a source is loaded in Listen Only mode. Pressing the Request Unload function will open a
new view requiring the operator to rotate the first knob and select the confirmation that the source is to
be unloaded. By pressing the knob in, after selecting to unload, requires a three step process to unload
the source from the other console. This is a security feature to avoid accidental operations. If the source is
in the ON state on the active owner, the source will not unload as an extra protection and the requesting
console will remain in Listen Only mode.

AES67 support

Version 3.1 introduces support for AES67 in the Studio Engine. This support is introduced in VMode
and is further discussed in the VMODE section of Chapter 4 of the manual. With VMode, it is possible to
convert AES67 streams with Livewire streams.

Accessory Panel Support

Version 3.1 also provides support of customized backfeed control with the Fusion Accessory panels. In
addition, support for a Fader panel will be introduce. With the Fader panel, a positions can control the level
of their own microphone away from the operator control or control a source other than the microphone,
often a playout computer.
© 2016 Axia Audio - Rev 2.0
Channel Option