Table of Contents
Advertisement
octet of the Engine IP address.
In this example, the engine has IP address 192.168.2.101
This will make easier to spot the right Engine channels when browsing a large network.
Don't forget to assign the CR Monitor and CR Headphones streams to the Destinations (outputs) of
the xNode you connected to your speakers and HP Amp. Or you will hear no Sound!
Surface Layer Configuration
Layers are useful when you need to access a number of DSP input channels on your engine which is
larger than the number of faders (or phisical channel strips) available on your Quasar surface.
Since any fader on any module could access any input channel on the Quasar Engine, you will need
to assign four input channel to each of the 4 layers available, on every Fader Module.
1. Using a PC connected to your studio network, launch a web browser and enter the IP address
assigned to the first (leftmost) fader module into the browser's address bar. When prompted for
authentication enter user name "user", and leave the password field blank.
2. In the left column, in the Module Manager section of the menu, select Layer Setup
3. Enter the number of the Engine input channel you want to assign to each physical fader, for each
of the four Layers.
© 2016 Axia Audio - Rev 2.0
Advertisement
Table of Contents
