Phase Iii Installation Procedures - Lucent Technologies AP-3 User Manual

101-1830-001 Issue 1.0
9. Log in to the ERP as root
10. At the # prompt, enter /var/erp_install/erp_install_b
11. You will be asked for the following information:
n
Are there 1, 2, 3, or 4 APSs?
n
The system name and IP address of the primary APS
n
The system name and IP address of any secondary APSs
You are now ready to perform the phase III install procedures described in
''Phase III Installation Procedures'' on page 362.
Enhanced Reporting Platform
361