Lucent Technologies AP-3 User Manual page 257

Avaya ap-3 access point: connection guide
Hide thumbs Also See for AP-3:
Table of Contents

Advertisement

505001
101-1830-001
Issue 1.0
Error Type
2 - Error
Module Type
5 - OCL
Status Message
ERROR: Unable to send OCL command to the network.
Status Data 1
RC = [integer] SOCKET = [integer] OCLPKT = [string]
Effect
Service will be affected.
Description
APS is having difficulty sending an OCL command to the VPM through
the network.
Resolution
1. Make sure the OCL network is up.
2. Make sure that the OCL version on the APS and the Sierra are the
same.
3. Check the network configuration parameters, especially those
that may have changed.
4. Make sure that the addresses of the APS workstation and the
Sierra are the same on both sides.
5. If the above steps do not solve the problem, escalate this alarm to
the next level of support.
Errors
257

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the AP-3 and is the answer not in the manual?

This manual is also suitable for:

Ap-4Ap-5Ap-6

Table of Contents