Lucent Technologies AP-3 User Manual page 153

101-1830-001 Issue 1.0
Table 12. jtest General Commands (Continued)
Command
display (cont.)
echo
help
or
?
open
Description
display [con=<n/i/o>] [log=<n/i/o>]
The con argument and options specify the
options for the console.
The log argument and options specify the
options for the log file. To use a log file, it
must have been specified when jtest was
started.
The i option enables display of incoming
messages from the board.
The o option enables display of outgoing
messages to the board.
Used in script files to display text to the
console. The text string must be in quotes. A
carriage return is echoed if no text is specified.
This command may be used throughout the
script file, even in the middle of an MML
command. The syntax of the command is:
echo ["text"]
Displays a list of jtest commands. To get help
on the usage of a particular command, the help
command (help or ?) should be followed by
the command name, for example,
? close
Each session, such as MMI or a load test, has
context-sensitive help. MMI sessions support
execution of the top level jtest commands,
even though help commands do not list them.
Starts a session between the jtest program and
the ecpmux device driver. For all commands,
the multiplexor device node, /dev/ecpmux,
must be specified as an argument. The syntax
for this command is:
open /dev/ecpmux
Procedures
153