Scripts Control Manager; Configurable Parameters; Runtime Status - Lucent Technologies AP-3 User Manual

Scripts Control Manager

Configurable Parameters

Runtime Status

101-1830-001 Issue 1.0
The Scripts Control Manager lets you collect scripts and profiles into a
list so that you may start and stop them with one operation rather than
separately.
Use this menu item to collect scripts and their profiles into a group, and to
remove scripts and profiles from a group.
Use this menu item to examine and change configurable parameters. The
changed variables take effect the next time the script starts.
Configurable parameters are specific to the application. See your
application document for specific reasons to change configurable
parameters and the ramifications of doing so.
Use this menu item to check the processing of a script or application as it
runs. This menu item shows process ID information and session
information. Table 7 shows the possible status a session may have.
Table 7. Runtime Status Descriptions
Status Description
Active Summary of busy, idle, done, and error sessions
Busy The number of sessions running as an incoming
call happens or the application goes off hook
Idle For the incoming script, the number of sessions
waiting for the incoming call. The script must be
defined as incoming in the Profile window.
NOTE: If Auto Restart is enabled, it takes 30
seconds for the sessions that shut down to become
busy again. The status for those sessions is idle for
that interval.
Done Number of sessions that completed gracefully if
Auto Restart is disabled
Error Number of sessions not completed gracefully
Menu Interface
103