Lucent Technologies AP-3 User Manual page 281

5230002
Problem with IPC
message send to
MSGQ.
Problem with system
signal.
101-1830-001 Issue 1.0
Error Type
2 - Error
Module Type
26 - IPC library
Status Message
This error can have two status messages:
ERROR: Problem with IPC message send to MSGQ.
or
ERROR: Problem with system signal
Both of these messages are discussed below.
Resolution
The resolution for both types of this error is the same.
1. Call the technical support help line to report this problem.
Status Data 1
ERRNO=[Integer] RC=[Integer] MODE=[Integer] MQ_
HANDLE=[Integer] MSG_SIZE=[Integer]
Effect
Service will be affected.
Description
The IPC library was unable to send data to a message queue because it
encountered a problem in the system call.
Status Data 1
ERRNO=[Integer] RC=[Integer] MQ_HANDLE=[Integer] MSG_
SIZE=[Integer] SND_TYPE=[Integer]
Effect
Service will be affected.
Errors
281