Phase Ii Installation Procedures - Lucent Technologies AP-3 User Manual

101-1830-001 Issue 1.0
10. Work through steps 5 through 9 again, this time selecting the
second feature name, WS compiler C++ Sparc.
11. If successful at step 9, click on Close.
12. Go back to main screen.
13. Click on Install.
The screen named "Get lit: informational message window"
displays.
14. If the first paragraph says that the licenses have been installed,
ignore the rest of the message.
15. Click on Cancel.
16. Proceed with the phase II installation steps. See ''Phase II
Installation Procedures'' on page 360.
Enhanced Reporting Platform
359