Monitoring Cron Task Status - Lucent Technologies AP-3 User Manual

Monitoring Cron
Task Status
101-1830-001 Issue 1.0
Use this procedure to find out what cron tasks are scheduled to be run by
the cron process. This procedure is helpful when troubleshooting cron
problems.
To check the cron task status:
1. From the APS main menu choose
Utility
Cron Tasks
Cron Status
The Cron Task Status window displays as shown in Figure 62.
Figure 62. Cron Table
The information in the Cron Task Status window shows
scheduled tasks, not tasks that are currently running.
2. Review the screen to see what cron tasks are running.
3. Click Refresh to display all new entries.
4. Click Done to exit.
If the cron process is not running, the Cron Task Status window will not
display.
Procedures
163