Aps System-Wide Tasks; Starting The Aps Interface - Lucent Technologies AP-3 User Manual

APS (Application Plus Server) 4.1 Users Guide

APS System-wide Tasks

Starting the APS Interface

112
System-wide tasks affect the APS 4.1 system as a whole. This section
describes the following system-wide tasks:
n
Starting the APS Interface
n
Quitting the APS Interface
n
Starting the Informix Database
n
Setting the Status Log File Size
n
Stopping the Volume Manager
n
Using Sun's X.25 Tool
n
Monitoring System Performance
n
Administering Hostnames and TCP/IP Addresses
n
Replacing a Hard Disk
Use this procedure to log in to the APS interface from a command
window:
1. Log in to the Sun system as user issg.
2. Click the ISSG_WIZ icon from the SunOS file manager window.
A small shell icon titled APS console displays, as well as the APS
main menu.
Or, you may use this procedure:
This procedure starts the APS platform from the Sun operating system
prompt.
1. From the SunOS login prompt enter issg
2. Enter your password.
3. Change directories to issg_main.
4. Enter issg.exe
The APS main menu displays.
101-1830-001 Issue 1.0