Terms; Generic Terms And Abbreviations - Mitsubishi Electric MELSEC iQ-R RD78G4 User Manual

TERMS

Unless otherwise specified, this manual uses the following terms.
Term
4-axis module
8-axis module
16-axis module
Axis
Buffer memory
CC-Link IE TSN
Command generation axis
Device
Global label
GX Works3
Intelligent function module
Label
Module label
Motion module
MR Configurator2
MR-J5-G
MR-J5W-G
RD78G
Servo amplifier axis

GENERIC TERMS AND ABBREVIATIONS

Unless otherwise specified, this manual uses the following generic terms and abbreviations.
Generic term/abbreviation
CC-Link IE
CPU module
Drive unit
Engineering tool
GOT
High-speed counter module
MR-J5(W)-G
Safety CPU
Safety station
Software
14
Description
Another term for RD78G4
Another term for RD78G8
Another term for RD78G16
A target for motion control
A memory in an intelligent function module, where data (such as setting values and monitoring values) are
stored. When using the CPU module, the memory is indicated for storing data (such as setting values and
monitored values) of the Ethernet function and data used for data communication of the multiple CPU function.
A high-speed and large-capacity open field network that is based on Ethernet (1000BASE-T)
An axis that performs only command generation. "Command generation axis" is not included in the number of
controlled axes of the controller.
Various types of memories (X, Y, M, D, or others) in a CPU module
A label that is enabled for all program data when creating multiple program data in the project. There are two
types of global labels: module label that is automatically generated by GX Works3 and label that can be created
for the any of the specified devices.
The product name of the software package for the MELSEC programmable controllers
A module that has functions other than input and output, such as an A/D converter module and D/A converter
module
A variable used in a program
A label that represents one of memory areas (I/O signals and buffer memory areas) specific to each module in a
given character string. GX Works3 automatically generates this label, which can be used as a global label.
Another term for RD78G
The product name of the setup software for the servo amplifier
MR-J5-_G_(-RJ) servo amplifier
MR-J5W_-_G servo amplifier
Another term for the MELSEC iQ-R series Motion module (compatible with CC-Link IE TSN)
A servo amplifier or virtual servo amplifier controlled by a controller. "Servo amplifier axis" is included in the
number of controlled axes of the controller.
Description
A generic term for the following:
• CC-Link IE TSN
• CC-Link IE Controller Network (MELSEC iQ-R CC-Link IE Controller Network User's Manual (Application))
• CC-Link IE Field Network (MELSEC iQ-R CC-Link IE Field Network User's Manual (Application))
The abbreviation for the MELSEC iQ-R series CPU module
A generic term for motor drive devices, such as servo amplifiers
A generic term for GX Works3 and MR Configurator2
A generic term for the Mitsubishi Electric GOTs (GOT1000, GOT2000 series)
An abbreviation for the MELSEC iQ-R series high-speed counter module
A generic term for MR-J5-_G_(-RJ)/MR-J5W_-_G/MR-J5D_-_G_ servo amplifiers
A generic term for R08SFCPU, R16SFCPU, R32SFCPU, and R120SFCPU
A generic term for a station that performs safety communications and standard communications
A generic term for the firmware components of the motion system. It consists of add-ons, basic system software,
and boot software.