Installing The Front Lift Arms; Preparing To Install The Lift Arms; Assembling The Lift Arms To The Machine - Toro Reelmaster 3100-D Operator's Manual

6

Installing the Front Lift Arms

Parts Required
1

Preparing to Install the Lift Arms

1. Insert a pivot rod
align the mounting holes.
2. Secure the pivot rods to the lift arms with 2
bolts (5/16 x 7/8 inch).
3. Torque the bolts to 37 to 45 N∙m (27 to 33 ft-
lb).
4. At the front of the machine, remove the 2
flange bolts (1/2 x 2 inches) that secure the
pivot-shaft link
and remove the link.
Note:
flange bolts.

Assembling the Lift Arms to the Machine

1. Assemble the lift arms
pivot shafts
2. Assemble the previously-removed pivot-shaft
link
flange bolts (1/2 x 2 inches)
3. Torque the flange bolts (1/2 x 2 inches) to 95
N∙m (70 ft-lb).
3466-297A
Lift arm kit (optional kit—order separately)
into each lift arm
to the lift arm pivot shafts
Retain the pivot-shaft link and the
onto the lift-arm-
as shown.
to the lift-arm-pivot shafts with the 2
and
G402564
,
G402566
.
G402567
Page 3–6 Setup: Installing the Front Lift Arms