Using The Cylinder Lock - Toro 68141G Operator's Manual

Using the Cylinder Lock

Installing the Cylinder Lock
1. Park the machine on a level surface, move
the motion-control levers to the N
position, engage the parking brake, and fully
raise the hopper.
2. Remove the 2 cotterless pins securing the
cylinder lock to the machine.
Figure 19
3. Slide the cylinder lock over the lift-cylinder rod
and secure with the cotterless pins.
Figure 20
Removing and Storing the
Cylinder Lock
Important:
Remove the cylinder lock from the
lift-cylinder rod and fully secure it in the storage
position before operating the machine.
1. Start the machine.
2.
3.
4.
-
EUTRAL LOCK
5.
6.
g324733
g324856
20
Fully raise the hopper.
Shut off the engine.
Remove the cotterless pins securing the cylinder
lock.
Place the cylinder lock on the posts inside the
machine frame and secure with the cotterless
pins.
Lower the hopper.