Easy Mode; Switching Between Modes - GLP SCAN OPERATOR FX II User Manual

channels, turn on the Fade-time function for each channel and alter the assignment of
the Pan/Tilt wheels.
The Pan/Tilt wheels can be assigned per fixture to one channel (1 to 16), each and can
be an alternative Pan/Tilt adjustment opportunity besides of the appropriate channel
faders.

4.2.4 Easy mode

The easy mode is Therefore quick testing of DMX controllable units or to extend bigger
DMX desks , where a extra DMX fader unit would be useful. Here there are 12 fixtures
with 10 channels each that are manually given (over the 10 faders). The scene keys
respond as flash keys for the first 8 channels of each set. The Blackout function turns all
120 DMX channels to 0. Other functions (except Desklock function) are deactivated.
Technical reference:
In easy mode , similar to play mode, 192 DMX channels are being sent. The channels
1-120 can be, as written above, controlled by the user. The channels 121-192 will be
constantly transferred with value „0".

4.3 Switching between Modes

To activate the different modes, press the belonging key for 3 seconds:
 Program mode: PROGRAM key
 Setup mode: SETUP key
 Easy mode: PROGRAM+SETUP key simultaneous
Switching between all modes can be done by pressing the belonging key. The Play
mode can be reached by pressing the key, which brought you into the current mode
again for 3 seconds.
Examples:
If you are in setup mode and want to change to program mode, press the program key
for 3 seconds.
If you are in program mode and want to go back to play mode, just press the program
key again for 3 seconds.
14/57