Copying A Scene; Copying Fixture Data - GLP SCAN OPERATOR FX II User Manual

4.6.3 Copying a Scene

1. Activate PROGRAM mode (PROGRAM key).
2. Press the BANK UP/DOWN key to call up the desired bank in which the
scene that shall be copied is on.
3. Load the scene which you would like to copy by pressing the appropriate
scene key once.
Attention:
Loading an empty scene is not possible! In that case you receive the error
message "Scene Empty".
4. Press the BANK UP/DOWN key to call up the desired bank which the scene
shall be copied to.
5. Press the RECORDS key.
6. Press the scenes key which you want to copy the chosen scene to. As
confirmation you will receive the message "Scene Saved".

4.6.4 Copying Fixture Data

This function allows you to transfer the current DMX values from one fixture to
another in PROGRAM mode (COPY).
1. Keep the Fixture key, which you want to copy, pressed
2. While you keep the first Fixture key pressed, press the desired second
Fixture key on which you want to copy.
3. In the display the signature "COPY" appears short as confirmation.
4. For example you can also press further Fixture keys, without releasing first,
in order to copy the same settings on further Fixtures.
Attention:
These changes take place in the buffer only. If you want to store the new
scene, then proceed as described above (RECORD and then scene key)!
18/57