Stratasys FDM 2000 Manual page 97

P400/500 Soluble Release User Guide
XI. Precautions or other comments:
Always add solid product concentrate to water with constant agitation. Never
add water to the solid product concentrate.
XII. Transportation Information
US DOT:
IATA:
XIII. Regulatory Information
Health – 1
XIV. Environmental and Disposal Considerations
Material that cannot be used should be diluted with water (5 parts water to 1 part used
solution, 5:1) in an appropriate container and disposed of at an approved facility in
accordance with any applicable regulations under the Resource Conservation and
Recovery Act. Note: State and local regulations may be more stringent than federal.
The information contained in the preceding report is based upon current knowledge, our experiences
with the product, and is not exhaustive. While not guaranteed, the information presented herein was
prepared by a competent technical professional and is true and accurate to the best of our knowl-
edge. The information applies to product as defined by the specifications. If the product is mixed
with other substances, the customer must confirm that no new hazards exist. In all cases the user is
not exempt from following all legal, administrative and regulatory procedures relating to the prod-
uct, personal hygiene, and the integrity of the work environment. Stratasys shall not be held liable
for any damage resulting from handling or from contact and use with the above product.
®
Flammability – 0
02MAY01
Not listed or regulated as a hazardous
material.
Not listed or regulated as a hazardous
material
Reactivity - 1
19