Stratasys FDM 2000 Manual page 80

2
Release
2.0
Notice
The information in this document is subject to change without notice.
STRATASYS, INC. MAKES NO WARRANTY OF ANY KIND WITH
REGARD TO THIS MATERIAL, INCLUDING, BUT NOT LIMITED TO,
THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
FOR A PARTICULAR PURPOSE. Stratasys, Inc. shall not be liable for
errors contained herein or for incidental or consequential damages in
connection with the furnishing, performance, or use of this material.
This document is protected by copyright. All rights reserved. Its use,
disclosure, and possession are restricted by an agreement with Stratasys per
software copyright. No part of this document may be photocopied, reproduced
or translated into another language without the prior written consent of
Stratasys, Inc. Printed in the USA.
FDM 1500, FDM 1600, FDM 1650, FDM 2000, FDM 3000, FDM 8000, FDM
Quantum, 3D PLOTTER, FDM, Models in Minutes, ProtoSlice, QuickSlice,
and Insight are trademarks of Stratasys, Inc.
Unix is a registered trademark of AT&T Bell Laboratories.
© 2000 Stratasys, Incorporated
P400/500 Soluble Release User Guide
Date
May 02, 2001
Stratasys, Inc.
14950 Martin Drive
Eden Prairie, MN 55344 USA
phone (952) 937-3000
fax (952) 937-0070
FDM@Stratasys.Com
02MAY01 ®