Stratasys FDM 2000 Manual page 32

F2/3/8000-26
6) Wait for the actual temperature on the liquefier temperature control to reach
the set temperature.
7) Press the "LOAD" button once on the control panel and wait for material to
come out of the FDM tip.
8) Press the "Load" button once to toggle it off.
Before Proceeding
Each tip is designated for use with only one material. Never use a
tip for a material other than the one you select for that tip.
FDM 2000/3000/8000 Manual
Usage—Modeling Operations
10MAY01
Procedures