Stratasys FDM 2000 Manual page 7

Procedures
level of the wax leave a residue-free cavity. (See the Materials Appendix for
more information about Investment Casting Wax.)
P400 ABS Plastic
This tough plastic is an acrylonitrile-butadiene-styrene based material which
produces sturdy prototypes. P400 ABS allows you to make models much
more similar to the desired final product than was possible with previous
modeling materials. (See the Materials Appendix for more information about
P400 ABS.)
P500 ABSi Plastic
P500 ABS is a medium grade, high impact strength ABS plastic. This tough
plastic meets all FDA USP Class VI requirements and can be gamma steril-
ized with negligible discoloration. (See the Materials Appendix for more
information about P500 ABSi.)
For more information about these materials, see the Materials Appendix in
the back of your FDM System documentation.
Elastomer
Stratasys E20 elastomer is a thermoplastic polyester based elastomer formu-
lated to provide a tough, flexible material that offers a unique combination
of mechanical and physical properties. Stratasys E20 elastomer was devel-
oped for applications requiring flexible models such as window and door
seals, straps, gaskets, toys and container designs. Models made from these
materials can be twisted, bent and flexed.
®
About The FDM —Materials
10MAY01
F2/3/8000-7