Stratasys FDM 2000 Manual page 127

Reference
Front Panel Functions — General
Each button produces an immediate effect if it is pressed while the FDM is
idle. If the Reset or Stop button is pressed when the FDM head is moving,
it takes effect immediately. The Pause button takes effect after the FDM
finishes its current tool path. You must hold the other buttons down
until the current movement of the FDM head is completed before they
take effect. Otherwise, the system will not react to the button.
The Rapid move button — the unlabeled button at the center of the four
arrow buttons — must be held down while you press one of the arrow
buttons.
The FDM front door has an interlock feature that prevents access to the inside.
To disable the interlock feature, press the Pause button, then open the
door.
Set Origin, Go To Origin, and Teach
Set Origin, Go To Origin, and Teach are not used in the mod-
eling process.
®
Descriptions—Control Panel
10MAY01
F2/3/8000-47