Stratasys FDM 2000 Manual page 96

18
VII. Handling and Storage:
Handling:
Storage:
VIII. Reactivity Data:
Stability:
Conditions to avoid:
Incompatibility (materials to avoid):
Hazardous Combustion or
Decomposition Products:
IX. Spill or Leak Procedures:
Material is Released or Spilled:
Waste Disposal Method:
X. Special Protection Information:
Ventilation:
Respiratory Protection:
Eye and Face Protection:
Skin Protection
P400/500 Soluble Release User Guide
Avoid contact with the skin, eyes, and
clothing. Use proper lab safety techniques
(i.e. gloves, goggles, etc). Wash exposed
areas immediately and thoroughly after skin
contact from working with this product and before
eating, drinking, using tobacco products or using the
restroom. The effects of exposure can cause burns
that are not immediately painful.
Keep in a closed, properly labeled container in a dry
area away from acids, water, oxidizing materials, and
metals. Protect from physical damage.
Stable at ambient temperature and pressure.
Avoid very rapid introduction of large
quantities of material to water.
Contact with acids, oxidizing metals.
None.
Sweep "inert" organic filament and dispose
of properly.
Not critical - dispose of as solid waste,
observing all local, state and federal
regulations.
Area-wide ventilation is acceptable.
Not required unless severe dust conditions
are present.
Safety glasses are recommended.
Latex or Neoprene glove required.
02MAY01 ®