Stratasys FDM 2000 Manual page 128

F2/3/8000-48
Keypad Functions and Messages
The keypad is located near the upper left corner of the FDM. It al-
lows the user to load or unload filament and calibrate the tips.
displays information about the current status of the FDM.
Keypad Display Panel Options
Below are listed the basic options available through the Keypad Display
panel. Most options for the Keypad Display panel are preset at Stratasys.
Pressing "Space231" allows the user to access the part material calibration
selections. Pressing "Space239" allows the user to access the support
material calibration selections. Pressing "Space236" displays the firm-
ware revision number. If it is necessary to change one of the preset
variables, call Stratasys Customer Support.
Selection
1
2
7
8
FDM 2000/3000/8000 Manual
Descriptions—Keypad Display Panel
The Keypad Display Panel
Variable
Cal N Mdl
Cal A Mdl
Cal N Spt
Cal A Spt
10MAY01
Reference
Entry
0
0
0
0
It also
Range
+ 50
+ 50
+ 50
+ 50