Stratasys FDM 2000 Manual page 60

A-12
Finishing Touches
ICW06 Finishing Tips and Techniques
Tools Required
Needle-nose pliers
l
Various picks and files
l
One or more small spatulas
l
One or more small chisels
l
220 grit sandpaper
l
Hot knife
l
Removing Supports
1) Use a small spatula or chisel to pry most of the support away from the part.
This minimizes the risk of damage to the part.
2) Use a needle-nose pliers and small picks to remove support material from
areas the spatula cannot reach.
3) Use a file to remove any remaining small bits of support or ooze from the
model.
Applications Manual
Chemical Finishing and Polishing
10MAY01
Reference