Audio Tab - Lightware HDMI-TPS-RX110AY Series User Manual


  
5.SoftwareControl-LightwareDeviceController
5.4.3. Audio Tab
Audio tab in Port parameters menu
The most important audio related information and settings are available on this tab.
HDMI-TPS-RX110AY series – User's Manual
Link Audio (I1)
This is the embedded TPS audio input line of the receiver. Clicking on the TPS icon results the settings panel
appearing on the right side. You can check the signal info of the port.
Available Settings:
▪
▪
▪
HDMI OUT Audio (O1)
This is the embedded HDMI audio output line of the receiver. Clicking on the HDMI icon results the settings
panel appearing on the right side. You can check the signal info of the port.
Available Settings:
▪
▪
▪
Audio Out (O2)
This is the de-embedded analog audio output line of the receiver. Clicking on the HDMI icon results the
settings panel appearing on the right side. You can check the signal info and the de-embeding status of the
signal.
Available Settings:
▪
▪
▪
▪
#mute #unmute #lock #unlock #volume #balance #analogaudio
Appliedfirmwarepackage:v1.4.0 | LDCsoftware:v2.4.0b3
Mute/Unmuteport;
Lock/Unlockport;
Reloading factory defaults (see factory default settings in the
Mute/Unmuteport;
Lock/Unlockport;
Reloading factory defaults (see factory default settings in the
Mute/Unmuteport;
Volume(inpercent);
Balance;
Reloading factory defaults (see factory default settings in the
33
Factory Default Settings section).
Factory Default Settings section).
Factory Default Settings section).