Port Parameters Menu; Video Tab - Lightware HDMI-TPS-RX110AY Series User Manual


  
5.SoftwareControl-LightwareDeviceController
5.4. Port Parameters Menu
5.4.1. Video Tab
Video tab in Port parameters menu
The most important video related information and settings are available on this tab.
Link Video (I1)
This is the TPS (HDBaseT) input line of the receiver. Clicking on the TPS icon results the settings panel
appearing on the right side. You can check the status of the line, signal info and current emulated EDID.
Available Settings:
▪ HDCPsetting(enable/disable);
▪ TPS mode (see details in the TPS Interface
▪ Cable Diagnostics and Frame Detector
▪ Reloading Factory Default Settings.
section);
tools;
Appliedfirmwarepackage:v1.4.0 | LDCsoftware:v2.4.0b3
HDMI-TPS-RX110AY series – User's Manual
HDMI OUT Video (O1)
This is the HDMI output line of the receiver. Clicking on the HDMI icon results the settings panel appearing
on the right side. You can check the status of the line, and signal and display info.
Available Settings:
▪ Mute/Unmuteport;
▪ Signaltype:Auto,DVI,orHDMI;
▪ HDCPmode:AutoorAlways;
▪ Power5Vmode:Auto,Alwayson,orAlwaysoff;
▪ Testpatternmode:Off,On,Nosignal;
Testpatternclocksource:480p,576p,orOriginalvideosignal;
▪
▪ Testpattern:Red,Green,Blue,Black,White,Ramp,Chess,Bar,Cycle;
▪ Frame Detector;
▪ Reloading Factory Default
#hdcp #tpsmode #cablediagnostics #mute #unmute #signaltype #power5v #testpattern #framedetector
Settings.
31