Linkrs-232Parameterssettings; Localrs-232Controlprotocolportsetting; Linkrs-232Controlprotocolportsetting - Lightware HDMI-TPS-RX110AY Series User Manual


  
6.LW2Programmers'Reference
6.6.3. Link RS-232 Parameters Settings
The parameters of link RS -232 (TPS) port can be set as follows.
Command and Response
ȩ {RS232_LINK_FORMAT=<BaudRate>;<DataBit>;<Parity>;<StopBit>}
Ȩ (RS232_LINK_FORMAT=<BaudRate>;<DataBit>;<Parity>;<StopBit>)CrLf
Parameters
Identifier Parameter description
<BaudRate> Baud rate
<DataBit> Data bit
<Parity> Parity
<StopBit> Stop Bit
Example
ȩ {rs232_link_format=9600;8;O;X}
Ȩ (RS232_LINK_FORMAT=9600;8;O;X)
Explanation
LinkRS-232portissetasthefollowing:thebaudrateto9600,databitto8,paritytoodd,andstopbitisnot
changed, remained 1.

INFO: ThecurrentlinkRS-232parameterscanbequeriedbythe{RS232_LINK_FORMAT=?}command.
HDMI-TPS-RX110AY series – User's Manual
Value Parameter value
X No change
4800 4800
7200 7200
9600 9600
14400 14400
19200 19200
38400 38400
57600 57600
115200 115200
X No change
8 8
9 9
X No change
N None
E Even
O Odd
X No change
1 1
1,5 1,5
2 2
Appliedfirmwarepackage:v1.4.0 | LDCsoftware:v2.4.0b3
6.6.4. Local RS-232 Control Protocol Port Setting
The control protocol of local RS -232 port can be set as follows.
Command and Response
ȩ {RS232_LOCAL_PROT=<protocol>}
Ȩ (RS232_LOCAL_PROT=<protocol>)CrLf
Parameters
Identifier Parameter description
<protocol> RS-232 control protocol
Example
ȩ {rs232_local_prot=lw2}
Ȩ (RS232_LOCAL_PROT=LW2)

INFO: ThecurrentlocalRS-232parameterscanbequeriedbythe{RS232_LOCAL_PROT=?}command.
6.6.5. Link RS-232 Control Protocol Port Setting
The control protocol of link RS -232 (TPS) port can be set as follows.
Command and Response
ȩ {RS232_LINK_PROT=<protocol>}
Ȩ (RS232_LINK_PROT=<protocol>)CrLf
Parameters
Identifier Parameter description
<protocol> RS-232 control protocol
Example
ȩ {rs232_link_prot=lw2}
Ȩ (RS232_LINK_PROT=LW2)
INFO:
ThecurrentlocalRS-232parameterscanbequeriedbythe{RS232_LINK_PROT=?}command.
61
Value Parameter value
LW2 LW2controlprotocol
LW3 LW3controlprotocol
Value Parameter value
LW2 LW2controlprotocol
LW3 LW3controlprotocol