5.SoftwareControl-LightwareDeviceController
5.7.3. Ethernet
ThreeportsaredisplayedintheEthernetsettings:Local,CPU,andTPS.Youcancheckthestatusofthe
Ethernetlinebyeachports:thespeedandtheduplexityoftheconnection.
Thefollowingsettingsareavailableforeachports:
▪
Enable/disabletheport;*
▪
Reloading factory defaults (see factory default settings in the
* CPU Ethernet port cannot be disabled.
#ethernet
Ethernet tab in Control menu
Factory Default Settings
Appliedfirmwarepackage:v1.4.0 | LDCsoftware:v2.4.0b3
HDMI-TPS-RX110AYseries–User'sManual
5.7.4. Infra
ATTENTION!
an IR emitter unit to the IR OUT and an IR detector unit to the IR IN connectors.
Infrared (IR) receiver and transmitter options can be found on this tab. There are three submenus are
availableunderit:IR codes, Ports, and Clear all IR codes.
IR Codes
UsercansetthenameoftheIRcode,thefingerprint(hash),andtherepeattimeoutinms,aswellasactions
can be ordered to each IR codes.
section).
The device has no built-in Infrared receiver and transmitter. For the complete usage attach
IR codes window in Control menu
40